Suckpax 1 Card printing

I’m going back in time to create a series of posts detailing the Suckpax 1 production.  Now that all the boxes are sold, the tale can be told.  Secrets can be revealed and banalities tucked into hiding.

July 2009

First came the cards….  The Sucklord created a phenomenal set of cards.    All the photoshop files came to SideKick and we marched off to our printer.

To produce the look and feel of the 80’s era cards, I searched for a print shop that still ran a vintage printer.  Bunch of looking, and I found a small company in Vermont with this machine in their basement.

The raw chip back paper stock was something unfamiliar to the printer, and it was a struggle to get the job to run correctly without shredding sheets or printer parts (one set of blankets was lost).

The printer is checking first sheets.

Everything dialed in, printing running smoothly.  The sharp eyed will notice that this sheet is showing the back side, and is printed on white stock instead of chip back.  This was done to create the sketch card blanks.  These cards had to be on white/white stock, so about 150 sheets were printed on white/white paper.  Then we cut out just the one card position, and discarded the rest of the sheet.  It seems wasteful, but far cheaper to print an extra 150 sheets than to make up a set of 4-color printing plates for just one card repeated 50 times and then print just 3 sheets.  Saves paper, but the cleanup of the machine between plates is more wasteful.  Once we had the white/white sheet stock printed, the rest of the run on white/chip paper stock was completed.